| Product Series | SHRINKING BODY () | 4~10, 105, 2,000Hrs Life Guarantee |
| Key Advantage | Smaller size than FVH series | |
| Design Feature | High Density PCB design for surface adhesion | |
| Operation Temperature Range | | -55~105 |
| Voltage Range | | 6.3~50V |
| Capacitance Range | | 10~1500 F |
| Capacitance Tolerance | at 120Hz, 20 | 20% |
| Leakage Current | I=0.01CV or 3 A, take the max. (C=Rated Capacitance(F), V=Rated DC Operating Voltage(V)) | Measured after 2 minutes at 6.3~50V |
| Dissipation Factor (Tan) | Max. Tan (at 120Hz, 20) | 4~10: 0.30~0.14 (Varies by voltage)
12.5~16: 0.35~0.16 (Varies by voltage)
*Add 0.02 for every 1,000 F increase when capacitance exceeds 1,000 F. |
| Stability at Low Temperature | Impedance ratio (at 120Hz) | ZT/Z20 (max):
D12.5: 4~2 (Varies by voltage)
D12.5: 5~2 (Varies by voltage)
Z(-55)/Z(20):
D12.5: 12~3 (Varies by voltage)
D12.5: 10~3 (Varies by voltage) |
| Endurance | Guaranteed life time | 4~5: 1,000 hours
6.3*7.7~10: 2,000 hours |
| Capacitance Change (after Endurance) | | D6.3mm: 25% of initial value
D8mm: 20% of initial value |
| Tan Loss (after Endurance) | | D6.3mm: 300% of initial value
D8mm: 200% of initial value |
| Leakage Current (after Endurance) | | Within specified value |
| Shelf Life | Guaranteed life time | 1000 hours (other test items same as endurance) |
| Ripple Current Correction Factor | Frequency (Hz) vs. Capacitance (F) | See table in source document for detailed values. |
| Drawing (Unit: mm) | Dimensions | See table in source document for DXL, A, B, C, P, L values. |
| Standard Products Overview | Rated Voltage (VDC) | Capacitance (uF) / Case Size (DxL) / Ripple Current (mA) |
| 6.3V(0J) | 10~1500 / Various DxL / Various mA |
| 10V(1A) | 10~1500 / Various DxL / Various mA |
| 16V(1C) | 10~1500 / Various DxL / Various mA |
| 25V(1E) | 10~1500 / Various DxL / Various mA |
| 35V(1V) | 10~1500 / Various DxL / Various mA |
| 50V(1H) | 10~1500 / Various DxL / Various mA |
| Case Size & Impedance | Impedance () at 20, 100KHZ, ripple current (mA rms) at 105, 120Hz | See table in source document for detailed values. |
| Endurance Note | Halving lifetime with every 10 rise due to internal heating from ripple current. Reduce ripple current for longer life. | |
| Taping Specifications | Refer to page 15 | |
| Package Quantity | Refer to page 16 | |
